We’re thrilled you’ve chosen Smallwoods steel wall décor to enhance your space! Installing your steel wall art is straightforward, and we’re here to guide you through each step.
🧰 What You’ll Need:
-
Level – To ensure your décor is straight.
-
Measuring Tape – For precise placement.
-
Pencil – To mark the wall for mounting.
-
Drill or Screwdriver – For securing your wall décor.
-
Wall Anchors & Screws – Especially if hanging on drywall or non-stud surfaces.
🛠️ Installation Steps:
-
Choose Your Spot:
-
Decide where you’d like to place your steel wall décor.
-
Use the measuring tape to determine the center or desired height.
-
-
Mark the Wall:
-
Hold the steel wall décor against the wall and mark the mounting holes with a pencil.
-
Use a level to ensure it’s straight.
-
-
Drill Pilot Holes:
-
If you’re hanging on drywall, drill small pilot holes where you marked the wall.
-
-
Insert Anchors (if needed):
-
Push or screw in the wall anchors, ensuring they’re flush with the surface.
-
-
Secure Your Décor:
-
Line up your steel wall décor with the anchors or marks on the wall.
-
Use screws to secure the décor in place, but don’t overtighten to avoid damage.
-
-
Double-Check:
-
Step back and use the level one last time to ensure everything is straight.
-
💡 Helpful Tips:
-
Stud Finder: If possible, mount your steel décor into wall studs for maximum stability.
-
Protective Pads: Add small felt or rubber pads on the back of the steel décor to protect your walls from scratches.
-
Ask for Help: For larger pieces, have someone assist you to avoid accidental drops.
💬 Need Assistance?
If you have any questions or need further guidance, chat with us using the icon on our website during business hours. Our team is here to help ensure your installation goes smoothly!
We can’t wait to see your new wall décor in action! Don’t forget to tag us in your photos on social media @SmallwoodsHome! ✨